Power plants or petrochemical plants usually perform chemical cleaning before operation according to the requirements and purposes of use after installation of a new boiler or pipeline to prevent operation obstacles and influence on product quality, as well as future damage of equipment and financial loss caused by unit shutdown due to insufficient cleanliness (like grease) or scaling, debris and contamination during construction. Therefore, it is usually necessary to perform chemical cleaning of the boiler or pipeline after completion of construction. ChelChem provides a single cleaning fluid that completes 3 stages of cleaning techniques: degreasing,descaling and passivation. E265 is the best choice of agent; it features outstanding cleaning effect, significant reduction of waste water and low corrosion rate to base metal; it can circulate for a long time and the cleaning agent can be injected at any time to thoroughly clean equipment or pipeline, achieving an effect unparalleled by traditional degreasing, acid pickling.

Reason for selecting E265:

E265 Process is safe chemical cleaning with low corrosion to base metal of the equipment.
E265 Process is chemical cleaning with single solution to complete degreasing, descaling and passivation
E265 Process creates only one system of waste water, which not only reduces waste water amount, but also saves chemical cleaning time and reduces risk; unlike traditional degreasing/acid pickling, which requires 5-6 times of system volume, longer cleaning time and higher degree of corrosion.

For more information : Tel : 04-896-8876/davidtsai@chelchem.com.tw