JST-250 Two Door Controller

  
* Please read using Adobe Reader 9.0 and above

📌Features

Control maximum 2 readers.
15,000 card capacity. Each card allows 4 digits PIN code.
8,000 history record capacity (each door is 4,000).
Standalone or PC on line.
Built-in clock and calendar.
Built-in Watch Dog. The system never hang.
Built-in RS232/RS485 Interface. TCP/IP is optional.
With a buzzer and 5 LED indicators.
With 4 relay output.
Support 8 time zones, 3 schedules per time zone.
Programmable door delay close time is 1 to 255 seconds. If the door remains open after set time, the alarm will be triggered.
Data is protected even after power failure.
Use DIP switch to set controller ID.
Operation mode: Card only, Card + PIN, PIN only, Facility Code Only, Opening or Inhibit Access.
Used with Wiegand readers or with I/O board for remote control use.

📌Specifications

•    Power requirement: DC 12V/1.5A                 
•    Communication interface: Provides 2 RS232/RS485 interface
•    Provides 4 input DI and 4 Output relay for DO
•    Operating temperature: 0℃~60℃
•    Dimension: 110mm x 95mm x 26mm

📌Download